 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Micrel, Inc. 16:1 MULTIPLEXER SY10E164 SY100E164 SY10E164 SY100E164 FEATURES s 850ps Data Input to Output s Extended 100E VEE range of -4.2V to -5.5V s Differential output s Fully compatible with industry standard 10KH, 100K ECL levels s Internal 75K input pull-down resistors s Fully compatible with Motorola MC10E/100E164 s Available in 28-pin PLCC package DESCRIPTION The SY10/100E164 are 16:1 multiplexers with a differential output. The select inputs (SEL0,1,2,3) control which one of the sixteen data inputs (A0-A15) is propagated to the output. Special attention to the design layout results in a typical skew between the 16 inputs of only 50ps. BLOCK DIAGRAM PIN NAMES Pin Function Data Inputs Select Inputs Outputs VCC to Output A0 A1 16:1 A14 A15 SEL0 SEL1 SEL2 SEL3 Q Q A0 - A15 SEL[0:3] Q, Q VCCO M9999-032006 hbwhelp@micrel.com or (408) 955-1690 Rev.: G Amendment: /0 1 Issue Date: March 2006 Micrel, Inc. SY10E164 SY100E164 PACKAGE/ORDERING INFORMATION A13 A14 A15 VCCO A11 A10 A12 Ordering Information(1) Part Number Package Type J28-1 J28-1 J28-1 J28-1 J28-1 J28-1 J28-1 J28-1 Operating Range Commercial Commercial Commercial Commercial Commercial Commercial Commercial Commercial Package Marking SY10E164JC SY10E164JC SY100E164JC SY100E164JC SY10E164JZ with Pb-Free bar-line indicator SY10E164JZ with Pb-Free bar-line indicator SY100E164JZ with Pb-Free bar-line indicator SY100E164JZ with Pb-Free bar-line indicator Lead Finish Sn-Pb Sn-Pb Sn-Pb Sn-Pb Matte-Sn Matte-Sn Matte-Sn Matte-Sn 25 24 23 22 21 20 19 A9 A8 SEL3 VEE SEL2 SEL0 SEL1 26 27 28 1 2 3 4 5 6 7 8 9 10 11 18 17 NC NC VCC Q Q VCCO A0 SY10E164JC SY10E164JCTR(2) SY100E164JC SY100E164JCTR(2) SY10E164JZ(3) SY10E164JZTR(2, 3) SY100E164JZ(3) SY100E164JZTR(2, 3) Notes: PLCC TOP VIEW J28-1 16 15 14 13 12 28-Pin PLCC (J28-1) A5 A4 A3 A2 A7 A6 A1 1. Contact factory for die availability. Dice are guaranteed at TA = 25C, DC Electricals only. 2. Tape and Reel. 3. Pb-Free package is recommended for new designs. M9999-032006 hbwhelp@micrel.com or (408) 955-1690 2 Micrel, Inc. SY10E164 SY100E164 TRUTH TABLE SEL3 L L L L L L L L SEL2 L L L L H H H H SEL1 L L H H L L H H SEL0 L H L H L H L H Data A0 A1 A2 A3 A4 A5 A6 A7 SEL3 H H H H H H H H SEL2 L L L L H H H H SEL1 L L H H L L H H SEL0 L H L H L H L H Data A8 A9 A10 A11 A12 A13 A14 A15 DC ELECTRICAL CHARACTERISTICS VEE = VEE (Min.) to VEE (Max.); VCC = VCCO = GND TA = 0C Symbol IIH IEE Parameter Input HIGH Current Power Supply Current 10E 100E -- -- 59 59 71 71 -- -- 59 59 71 71 -- -- 59 68 71 81 Min. -- Typ. -- Max. 150 TA = +25C Min. -- Typ. -- Max. 150 TA = +85C Min. -- Typ. -- Max. 150 Unit A mA Condition -- -- AC ELECTRICAL CHARACTERISTICS VEE = VEE (Min.) to VEE (Max.); VCC = VCCO = GND TA = 0C Symbol tPD Parameter Propagation Delay to Output A Input SEL0 SEL1 SEL2 SEL3 Within-Device Skew Rise/Fall Times 20-80% Min. 350 500 400 400 400 -- 275 Typ. 600 700 675 675 550 50 400 Max. 850 900 900 900 700 -- 550 TA = +25C Min. 350 500 400 400 400 -- 275 Typ. 600 700 675 675 550 50 400 Max. 850 900 900 900 700 -- 550 TA = +85C Min. 350 500 400 400 400 -- 275 Typ. 600 700 675 675 550 50 400 Max. 850 900 900 900 700 -- 550 ps ps 1 -- Unit ps Condition -- tskew tr tf Note: 1. Within-device skew is defined as the difference in the A to Q delay between the 16 different A inputs. M9999-032006 hbwhelp@micrel.com or (408) 955-1690 3 Micrel, Inc. SY10E164 SY100E164 28-PIN PLCC (J28-1) Rev. 03 MICREL, INC. 2180 FORTUNE DRIVE SAN JOSE, CA 95131 TEL USA + 1 (408) 944-0800 FAX + 1 (408) 474-1000 WEB http://www.micrel.com The information furnished by Micrel in this data sheet is believed to be accurate and reliable. However, no responsibility is assumed by Micrel for its use. Micrel reserves the right to change circuitry and specifications at any time without notification to the customer. Micrel Products are not designed or authorized for use as components in life support appliances, devices or systems where malfunction of a product can reasonably be expected to result in personal injury. Life support devices or systems are devices or systems that (a) are intended for surgical implant into the body or (b) support or sustain life, and whose failure to perform can be reasonably expected to result in a significant injury to the user. A Purchaser's use or sale of Micrel Products for use in life support appliances, devices or systems is at Purchaser's own risk and Purchaser agrees to fully indemnify Micrel for any damages resulting from such use or sale. (c) 2006 Micrel, Incorporated. M9999-032006 hbwhelp@micrel.com or (408) 955-1690 4 |
Price & Availability of SY100E164JZ
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |